Researchers from Taiwan's ITRI developed a foldable AMOLED display - which fold both inwardly and outwardly.

ITRI will transfer this new technology to Chunghwa Picture Tubes (CPT) in Q4 2016. CPT will start trial production at its pilot 4.5-Gen AMOLED fab (currently used to produce glass-based rigid AMOLEDs in small volume). In August 2015, CPT signed a technology-transfer agreement with ITRI for its flexible OLEDs.

Taiwan's ITRI showcased over 30 new OLED lighting lamp designs, it co-developed with the Taiwan Lighting Fixture Export Association (TLFEA). ITRI also demonstrated a new automotive OLED lighting prototype it co-developed with Ta Yih, which you can see below.

ITRI is reportedly building a Roll-to-Roll (R2R) R&D pilot line to produce flexible OLED lighting panels on flexible glass substrates. The line will be operative by 2017, and will be able to produce about 700 panels per month.

According to Digitimes, Taiwan's ITRI is building a Roll-to-Roll (R2R) R&D pilot line to produce flexible OLED lighting panels. The line will be operative by 2017, and will be able to produce about 700 panels per month.

ITRI's new OLEDs will be based on flexible glass substrates. Back in 2012 ITRI collaborated with Corning to develop a full roll-to-roll process on 100um flexible glass Willow glass substrates. It's likely that the new line will also use Corning's Willow glass.

Taiwan's ITRI research institute developed a long-lasting OLED blue emitter. The researchers used a green phosphorescent emitter with a new double metal structure - that emits a blue light. The so-called Plasmon-Coupled Organic Light Emitting Diode (PCOLED) structure's lasts 27 times as long as a blue fluorescent emitter.

The researchers explain that a regular green phosphorescent emitter always emits a very weak emission. By using the double-metal structure, more plasmons are generated which means a larger blue emission. This is not an up-conversion process - but merely a change in conditions within the green material. This condition was actually discovered by accident.

Earlier this month we reported that Taiwan's Chunghwa Picture Tubes (CPT) signed an agreement with ITRI for a technology transfer for flexible AMOLED and touch panel integration. Today we hear that CPT expects to start mass producing such flexible touch AMOLEDs by 2017.

CPT has an existing pilot 4.5-Gen AMOLED fab (used to produce AMOLEDs in small volume) - and reportedly they will either convert this line to flexible AMOLED or somehow integrate it with ITRI's 2.5-Gen flexible AMOLED line. CPT will also aim to use IGZO backplanes for AMOLED production.

Taiwan's ITRI demonstrated several new flexible OLED prototypes at Touch Taiwan. As promised a few weeks ago, ITRI demonstrated a 7" flexible OLED touch panel prototype. The panel has been developed in collaboration with Heraeus which integrated its Clevios PEDOT conductive polymer based touchpanel.

ITRI also exhibited a z-fold 7.1" Full-HD (310 PPI) AMOLED prototype that can be folded both inward and outward. The bending radius is 5 mm.

Taiwan's Chunghwa Picture Tubes (CPT) signed an agreement with ITRI for a technology transfer for flexible AMOLED and touch panel integration (specifically ITRI's FlexUP flexible substrate technology - which is owned by FlexUp, encapsulation technology and flexible touch sensor technology).

CPT aims to use these technologies to achieve flexible OLED mass production "as soon as possible". Earlier today we posted that ITRI is set to demonstrate a 7" Full-HD foldable AMOLED prototype soon. ITRI and CPT has been cooperating on flexible OLEDs since 2012.

Taiwan's ITRI says they will demonstrate a new 7" Full-HD foldable AMOLED prototype at the upcoming Touch Taiwan 2015 event (26 August).

This panel is an improvement over the foldable AMOLED ITRI demonstrated at Touch Taiwan 2014. The 2014 prototype was a full-color foldable 6" AMOLED (we do not know the resolution of the 2014 panel).

ITRI and Orbotech signed an agreement to jointly develop solutions for flexible display production. In the first stage, ITRI will use Orbotech's inspection technology to identify production bottlenecks in flexible AMOLED processes.

ITRI says that they are confident that flexible devices are the future of the display industry, and that flexible OLEDs will bring next generation form factors such as foldable tablets and wearable devices.

In April 2014 Taiwan's ITRI Institute developed a new technology that enables OLED lighting panels to be patterned with static grayscale images. The new technology is called Image Lighting and it be easily be fitted into a normal OLED production process.

Today ITRI sent us an update on that project. The researchers have been upgrading the process, and have now demonstrated a new panel prototype (which you can see above), that is 10x10 cm in size and has 220 grayscale levels (up from 200 a year ago).