TCL said in a recent press conference that the company plans to start producing OLED TV panels in 2023. These OLED panels will be printed using an inkjet printing process.

TCL has been a long time believer in inkjet printing for OLED displays, and the company has established Juhua Printing in 2016 (together with Tianma and other collaborators) as an "open-innovation platform" to develop ink-jet printing of OLED panels. In 2020 TCL invested $187 million USD in Japan's inkjet printing developer and producer JOLED, and has also signed an agreement to jointly develop OLED TV printing technologies.

TCL collaborated with perovskite QD film developer Zhijing Nanotech to produce 500 75-inch QD-enhanced LCD TVs with Zhijing's PQDF films. This is likely to be the world's first commercial adoption of pQD films in the display industry, as the TVs were sold successfully in China and Zhijing hopes to achieve a mass production design win with TCL in 2021

The company reports that the TVs featured a wide color gamut, 147% BT709 - which is higher than most QD TV's on the market, and higher than TCL's original 75M10 TVs. The green Cadmium-free pQD films have excellent optical properties and offer lower cost compared to current QD solutions, according to Zhijing Nanotech.

In October 2020 TCL's CSoT demonstrated some new rollable OLED technologies, and today at CES the company published this nice video you see below that again demonstrates new rollable OLEDs:

TCL first shows a rollable smartphone, that uses a 7.8-inch AMOLED that rolls into a 6.7-inch one. The display features a bending radius of 3 mm and CSoT says it can withstand up to 100,000 sliding cycles.

TCL has been involved with OLED inkjet printing technologies for many years, and the company''s chairman and founder Li Dongsheng yesterday posted that the company will reveal its first printed OLED products next week. Li also uploaded the following video that showcases the company's inkjet printing technology:

This is somewhat surprising as it may be too early for TCL to actually launch inkjet printed OLEDs. TCL has been a long time believer in inkjet printing for OLED displays, and the company has established Juhua Printing in 2016 (together with Tianma and other collaborators) as an "open-innovation platform" to develop ink-jet printing of OLED panels. Last year TCL invested $187 million USD in Japan's inkjet printing developer and producer JOLED, and has also signed an agreement to jointly develop OLED TV printing technologies.

TCL's CSoT demonstrated some interesting new displays at the DTC 2020 conference a few days ago - including rollable OLEDs, foldable OLEDs, ink-jet printed rollable OLEDs and new microLED prototypes.

In the video above, you can first see the company's latest inkjet-printed rollable OLED, with a size of 17-inch. CSoT says that it managed to reduce the OLED thickness by removing the color filters it used in earlier designs, which improves the flexibility - as you can see this display rolls up very nicely.

According to reports from China, TCL says its CSOT OLED inkjet printing project is going well, and the company expects to start mass production at its 8.5-Gen Guangzhou T8 (owned by Huaxing Optoelectronics) production line in 2024.

Earlier this year the Guanghzhou development commission issued a report that says CSOT's investment in this R&D and production project will amount to 46 billion yuan ($6.8 billion USD), and the construction of the actual production line will be in 2021-2023.

JOLED announced that TCL CSoT has invested 20 billion Yen (around $187 million USD) in the company, and has also signed an agreement to jointly develop OLED TV printing technologies.

This is a very interesting development. TCL has been a long time believer in inkjet printing for OLED displays, and the company has established Juhua Printing in 2016 (together with TianMa and other collaborators) as an "open-innovation platform" to develop ink-jet printing of OLED panels. JOLED was not involved as far as we know in this alliance - so has TCL given up on Juhua and is now aiming to rely on JOLED's technology?

TCL has unveiled two interesting foldable OLED prototype devices. The first one is a tri-foldable OLED smartphone, that has a 10" 3K AMOLED display that folds into a 6.64" one. The second is the sliding-expanding prototype we already reported on last month.

These are still very early prototype devices, reportedly the software is not taking advantage of the special display features.

CNet reports that TCL was supposed to demonstrate a novel smartphone design next week (at the cancelled MWC event) that uses an "expandable" sliding OLED display. The idea is basically the same as in the first crop of foldable OLEDs - provide a phone that can open up to a tablet-size device:

Apparently TCL was supposed to show a working demonstration. Such a design will likely require a screen that is folded in two places or some sort of rollable display - which is possible but more difficult to actually commercialize compared to a screen that folds inwardly or outwardly in a single position.

Update: It seems we were mistaken, this prototype is not a hybrid QD-OLED, but a 'regular' OLED. This is still an impressive development - a rollable inkjet-printed OLED display.

TCL and Juhua Printing demonstrated a 31" FHD inkjet-printed rollable hybrid QD-OLED TV prototype. The display uses an IGZO (Oxide-TFT) backplane and TCL says that it has an aperture ratio of over 50%, brightness of 200 nits and a 90% DCI-P3 color gamut.

TCL's hybrid display technology (which TCL calls H-QLED) uses a blue OLED emitter coupled with red and green QD emitters. All three emitter materials are combined and printed using ink-jet printing technology.